Swing Out Hinge Parts List

8 ft - 2" x 1/4" strap
22" - 6" x 1/8" plate
3ft -1/2" square rod
20" - 1/2 dia rod
18 ft - 1 1/4 x 1/8 wall square tube
7 ft - 2" x 1/8" L
4 ft - 1" x 1/8 strap
1 ft - 1" x 1/8' L
2 - 1" ID Bushings (Pully stops, about 3/8-1/2" thick.  **
2" - 1" solid rod  **
1 ft - 1" ID tubing  (black pipe or tubing with a wall of about 1/8" - 1/4"  **
2 pancake bearings, 1" ID

I do not have the bearing number here, but it is a standard pancake bearing with top and bottom hardened washers from King Bearing.   The asterisks are the ones you will need for the pivot or hinge.   The 1" ID bushings are the simple stops that you get at a hardware store.  I used them cause they are flat on one side
and made the interface with the bearing clean.